MEDIWET - NOT AVAILABLE
Group Number: 3323The humidifier for oxygen therapy is a device allowing an increase in the relative humidity in the oxygen supplied to the patient; this gas for medical use normally lacks a sufficient humidity grade to be physiologically tolerated.
The jar is made of polycarbonate, or polysulphone the cap with inlet adaptor of polypropylene and inlet connection of polypropylene + coated brass.
Art. Nr. | Description | Inlet connection |
K294402 | MEDIWET 134°C | 9/16" UNF F |
K294432 | MEDIWET 134°C | G 3/8" F |
K293498 | MEDIWET 134°C | M 12×1,25 |
K294435 | MEDIWET 134°C | G 1/4" |
K294402 | MEDIWET 134°C | 9/16" UNF |
K294416 | MEDIWET 121°C | G 3/8" |
K293491 | MEDIWET 121°C | M 12×1,25 |
K294452 | MEDIWET 121°C | G 1/4" |
K294401 | MEDIWET 121°C | 9/16" UNF |
TECHNICAL DATA
Contents: | Only sterile water |
Dimensions: | |
Height: | 190 mm |
Diameter: | 57 mm |
Width: | 67 mm |
Weight: | 145 g |
Capacity: | 200 ml |
Material: | Jar polycarbonate (autoclavable at 121 °C) Jar polysulphone (autoclavable at 134 °C) Lid and outlet hose nipple: polypropylene |
Inlet nut: | Chrome brass |
Diffuser: | Polyethylene |
Hose: | Silicone |
Cleaning: | Water, non-abrasive detergent. Never use solvents. |
Disinfection: | An alcoholic solution, or other solution compatible with the material according to the disinfectant manufacturer. |
Autoclave: | Polycarbonate version 121°C for 20 minutes Polysulphone version 134°C for 18 minutes |
Special case: | |
Diffuser: | Exchange at every cleaning - do not sterilise! |
Maintenance: | Check that the humidifier is whole and airtight before use. Monthly exchange of gaskets is recommended. Exchange the diffuser when its micro perforations no longer exist. |
Durability: | Minimum 20 autoclave cycles under the condition that all instructions accompanying the product are adhered. |
SPARE PARTS
Art. Nr. | Description |
K294486 | Silicone hose, 10 pcs |
K294434 | Silicone hose + diffuser, 10 pcs |
K294415 | Diffuser, 10 pcs |
K294408 | Washer 121°C (under lid) 10 pcs |
K294409 | Washer 134°C (under lid) 10 pcs |
Art. Nr. | Inlet connection |
K294433 | O-ring G 3/8", (10 pcs) |
K294407 | O-ring G 1/4" and 9/16" UNF, (10 pcs) |