GAS MANIFOLD MC80
Whole medical range is available on
Manifold MC80 HP UNIT is a fi rst stage pressure regulator intended for use in hospital pipeline systém as a medical gas source.
MC80 HP UNIT contains two regulators with pressure relieve valves and it is connected to two various cylinder banks using high pressure hoses. When the cylinder bank, which has been connected for operation, has been emptied the other duty side is automatically connected.
It is equipped with pressure switches and pressure transmitters 4 – 20 mA. Together with MC80 HP UNIT shall always be used gas alarm providing all alarms in compliance with the standard EN ISO 7396-1.
SPECIFICATION
MC80 HP UNIT INCLUDES THE FOLLOWING COMPONENTS:
- MC80 HP Manifold
FOR A COMPLETE MC80 HP UNIT MANIFOLD ADD:
- Gas alarm (optional accessories)
- High pressure hoses (optional accessories)
Item No. | Denomination | Gas |
PRV |
Alarm |
0727321 | MC80 HP 2x1 | O2 | With pull-ring | switch + 4–20 mA |
0727322 | MC80 HP 2x1 | Air | With pull-ring | switch + 4–20 mA |
0727323 | MC80 HP 2x1 | N2O/O2 | With pull-ring | switch + 4-20 mA |
735100000867 MC80 leaflet EN
TECHNICAL DATA
Gases: | O2, Air, N2, N2O, CO2, (all medical gases) |
Nominal flow: | 200 m3/h |
Inlet maximal pressure: | 200 bar (20 000 kPa) |
Outlet nominal pressure: | 12 bar (setting range 10–16 bar) |
Inlet connection: | W21,8×1/14“M |
Outlet connection: | G3/4"F |
Pressure relieve valve: | 17 bar |
Pressure relieve valve pipe dimension: |
∅ 10 mm |
Purge valves connection: | W21,8×1/14“M + pipe ø 15 mm |
Regulatory status: |
Complies with Medical Devices Directive 93/42/EEC present SIS HB 370 and HTM 02-01 |