FEATURES 316L SS Machined Wetted Parts Large sensitive elastomeric diaphragm 0,1 bar to 10 bar / 1,5 psi to 150 psi control range Minimal decaying inlet pressure effect For flow rates to 30Nm³/hr (@ max P2)
The BP-301 incorporates a highly sensitive piston to control pressures up to 70 bar with the lower Cv value of 0.1, and 35 bar with a higher Cv of 0.5. Both designs provide accurate back pressure control on liquid or gas applications. Unlike relief valves, the set load from the spring is not directly applied to the seating area, and the piston sensor provides accurate control throughout the control range. FEATURES Lightweight compact design
The TS-300 provides stable pressure control under decaying cylinder pressures. The first stage of the regulator is set to 35 bar to allow maximum flow capability through the regulator. SPECIAL FEATURES Metal to metal sealing diaphragm Sealing area protected and centralized within the body of the regulator 0,04 % decaying pressure effect ‘Interstage’ relief valve option
The BP-MF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to xx lpm (liquid). The liquid version includes ceramic seating for ultimate protection against cavitation and erosion on aggressive application media such as water glycol and methanol. This accurate regulator controls inlet pressure and vents excess pressure back via the threaded ¾” NPT outlet port. FEATURES Inlet co
The MF-101 incorporates a large precision machined sensing element to control outlet pressures up to 35 bar from a maximum 100 bar inlet. The main valve is an unbalanced design to create positive shut off on gas or liquid applications against the PEEK seat. Lightweight compact design Piston sensing element High accuracy
The LF-300 has been designed with quality and reliability in mind, with genuinely unique features designed into this single stage regulator. Finite Element Analysis, combined with physical cycle tests, created an Inconel X750 diaphragm that lasts 50 % longer than a typical stainless steel designs.The metal diaphragm means that leak integrity is maintained, and that no sample media is absorbed by the sensing element – reducing purge times be
The LF-690 uses Ceramic Seating to provide ultimate protection against the harsh service encountered on hydraulic services. The unique seating cartridge provides a dampening action on this critical component to prevent ‘chattering’ or ‘unstable frequency resonance’. The regulator is self relieving with segregated captured vent to prevent deterioration to the loading mechanism and making the regulator cleaner to service. Th
The MF-414 is a medium flow piston sensed pressure reducing regulator, which incorporates a balanced main valve to provide stable control under varying inlet pressures. The regulator has the option of a PEEK seat for gas service, or 17-4SS for hydraulic service. Both designs have a segregated captured vent to allow pressure reduction of the outlet pressure through a ¼ NPT port on the side of the regulator body. FEATURES 414 bar / 6000
316L SS Wetted Parts Balanced Main Valve Cv 4.0 Diaphragm or Piston Sensed Range of O Rings None rising stem Low torque adjustment Threaded or Flanged Options
316L SS Wetted Parts Balanced Main Valve Cv 2.0 Diaphragm or Piston Sensed Range of O Rings None rising stem Low torque adjustment Threaded or Flanged Options